Teac CD-P1260MKII, Owner'S Manual

Page: 15 / 144

15
EN
G
LI
SH
Up to 32 tracks/files can be programmed in the desired order.
1
Press the PROGRAM button when playback is stopped.
MP3/WMA disc
CD
The MEMORY indicator appears, showing that program mode is
enabled.
<
To stop programming, press the Stop button (
H
).
2
(When programming with an MP3/WMA disc)
Press the Number buttons to select a folder, then press
the PROGRAM button.
<
You can also use the Skip buttons (
.
/
/
) to select folders.
<
MP3/WMA files not located in a specific folder are in the “01”
(ROOT) folder.
<
You can also press the ENTER button to confirm a folder.
3
Press the Number buttons to select a track/file, then
press the PROGRAM button.
The track/file is programmed, and “P-02” is displayed.
<
You can also use the Skip buttons (
.
/
/
) to select tracks/
files.
<
You can also press the ENTER button to confirm a song number.
<
Repeat steps 2 and 3 to program more tracks/files.
<
You can program up to 32 tracks/files.
<
To stop programming, press the Stop button (
H
). Programming
is cancelled, but the program contents are retained in memory.
To restart program playback, press the PROGRAM button, and
then press the Play/Pause button (
G
/
J
).
4
When the selection of track/file numbers is completed,
press the Play/Pause button (
G
/
J
) to start program
playback.
<
After program playback finishes, press the Play/Pause button
(
y
/
J
) to play the program again.
<
Pressing the POWER button or the OPEN/CLOSE button (
L
)
causes the program content to be discarded.
<
The shuffle function does not work during program playback.
<
During program playback, tracks/files cannot be selected using
the Number buttons.
Program playback