Teac CA-20, Instruction Manual

Page: 9 / 17

3. Menu items and settings
To get into menu mode, press both UP and DOWN key at once.
No Item Parameter Note
1 Source Current 4mA/2mA/0.5mA Select constant current of ICP supply
2 Source Voltage 24V/15V Select bias voltage of ICP supply
3 PC Link Link/Cut Communication mode with PC
4 Data List Data list view
5 Clear Data List Clear/Cancel Clear all data
6 Measure Mode Single/Repeat Select measure mode
7 Auto Power off ON(3min)/OFF Set auto power off
8 LCD illumination ON/OFF Select LCD backlight setting
9 Date Time Set Time Date Set Time Date Month Year
10 Data Transmit Transmit/Cancel Transfer data to PC
Return Return
: Factory settings
All settings are kept, even if CA-20 is turned off.
Typical PCB® accelerometer use 4 mA / 24 V. So please change source current to 4 mA and source
voltage to 24 V.
5