TE-Group Guardo Dashcam Pro, User Manual

Page: 7 / 76

-7-
VIDEO* PHOTO*
MICRO
SD Card
HDR 1920*1080
25FPS 16:9
2560*1080
25FPS 21:9
2304*1296
25FPS 16:9
1920*1080
45FPS 16:9
1920*1080
25FPS 16:9
1280*720
50FPS 16:9
4 MP
16GB 156 min 108 min 108 min 156 min 156 min 156 min 3660
32GB 322 min 223 min 223 min 322 min 322 min 322 min 7410
64GB 652 min 451 min 451 min 652 min 652 min 652 min 14835
128GB 1315 min 910 min 910 min 1315 min 1315 min 1315 min 29735
* Depends on SD card brand, model and class type. Data are approximate.
Video Resolution
Capacity of 2 minutes
HDR 1920*1080 25P 16:9 180 MB (188,874,752 bytes)
2560*1080 25P 21:9 260 MB (272,760,832 bytes)
2304*1296 25P 16:9 260 MB (272,760,832 bytes)
1920*1080 45P 16:9 180 MB (188,907,520 bytes)
1920*1080 25P 16:9 180 MB (188,874,752 bytes)
1280*720 50P 16:9 180 MB (188,907,520 bytes)
Photo Resolution: 4MP 1.16 MB (1,220,608 bytes)
INSTALLATION
Illustration III
1. Slide the suction cup bracket (17) in the designated location at the top of the camera
until it clicks into place. Make sure the suction cup lever is unlocked.
2. Clean the inner front windshield of the car and remove the protective film from the
bottom of the suction cup. Moisten the suction cup, place it on the inside of your
windshield and lock the cup using the lever. We recommend placing the Guardo
DASHCAM PRO on the right side of the rear view mirror. Make sure the camera is
mounted horizontal for the best view.
3. Adjust the bracket position by using the adjustment knobs.
4. Connect the USB cable (19) of the car charger (18) to the USB port (2) of the DASHCAM,
and insert the car charger into the cigarette lighter.