©2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
Operating Instructions
4-744017-0
Rev A
*Trademark. Other products, logos, and company names used are the property of their respective owners.
1 General Specifications
1.1 Copyrights, industrial property rights
The copyright to these operating instructions is held by TE Connectivity Ltd.
These operating instructions are only intended for users of the MQS Hand Tool 0.13–0.17 mm², TE
PN 4-1579014-3 (hereinafter referred to as the "hand tool").
The relevant supplementary operating instructions include descriptions, technical drawings, specifica-
tions and instructions, no part of which may be reproduced, circulated, disclosed or used for the pur-
pose of competition without permission.
Should third parties endeavour to gain access to these operating instructions, the same fairness is
expected from you as you would expect from your customers in such cases.
All rights reserved in particular including the granting of patents or other registrations. Subject to
technical changes.
2 Using these Operating Instructions
These operating instructions contain important information about using the hand tool safely and
properly.
Read the instructions in full, particularly Section 3, "General Safety Instructions", before working with
the hand tool.
TE Connectivity Ltd. accepts no liability for any loss or damage attributed to failure to follow the op-
erating instructions.
These operating instructions must be supplemented by the hand tool user with instructions based on
existing national regulations for the prevention of accidents and environmental protection.
The generally applicable, statutory and other binding regulations of European and national law as well
as the regulations for the prevention of accidents and environmental protection applicable in the coun-
try of use must also be observed.