ADCP-92-159 • Issue 1 • 2/2015
Page 11
© 2015, Tyco Electronics Corporation
Figure 11. Installing Adapter Packs
3.3
Installing MPO Cassettes
This section describes how to install MPO cassettes in an empty FPX panel. The 1RU panel
accommodates two MPO cassettes, the 2RU accommodates four. To install MPO cassettes, use
the following procedure.
1. Temporarily remove the top cover so as to have access to the inside of the panel.
"OUT"
POSITION
"IN"
POSITION
256
8
0-A
INSTALL ADAPTER PACKS
IN ORIENTATION SHOWN
IN
S
TALL RIGHT
S
IDE ADAPTER PACK
S
WITH ADAPTER
S
ANGLED TOWARD THE RIGHT
NYLATCH PLUNGER FASTENERS MUST BE
PULLED OUT BEFORE INSERTING THE
ADAPTER PACK INTO MOUNTING HOLES
IN PANEL
AFTER INSTALLING ADAPTER PACK,
PUSH NYLATCH PLUNGER FASTENERS
"IN" TO LOCK ADAPTER PACK INTO PANEL
IN
S
TALL LEFT
S
IDE ADAPTER
PACK
S
WITH
ADAPTER
S
ANGLED
TOWARD THE LEFT
