ADCP-92-159 • Issue 1 • 2/2015
Page 13
© 2015, Tyco Electronics Corporation
3. Pull the Nylatch plunger fastener out, orienting the MPO as shown in
Figure 14. Installing MPO Cassettes
To remove an MPO cassette, pull the Nylatch plunger fastener out, as shown in
release the cassette, then withdraw it from the panel.
Caution:
Adapter packs and MPO cassettes should not be both used in the same panel.
INSTALL LEFT SIDE MPO
CASSETTES WITH ADAPTERS
ANGLED TOWARD THE LEFT
INSTALL RIGHT SIDE MPO
CASSETTES WITH ADAPTERS
ANGLED TOWARD THE RIGHT
INSTALL MPO CASSETTES
IN ORIENTATION SHOWN
25682-A
AFTER INSTALLING MPO CASSETTE,
PUSH NYLATCH PLUNGER FASTENERS
"IN" TO LOCK CASSETTE INTO PANEL
"IN"
POSITION
NYLATCH PLUNGER FASTENERS MUST BE
PULLED OUT BEFORE INSERTING THE
MPO CASSETTE INTO MOUNTING HOLES
IN PANEL
"OUT"
POSITION
