409-35009
Rev E
30 of 44
7.1.
Air feed valve kit (PN 2372210-1)
Figure 22: Air feed valve kit PN 2372210-1
1
Port 3: Constant air supply (for use with air feed units with built-in valves
2
Port 2: Cylinder retract connection (throttle acting air cylinder connection)
3
Port 1: Cylinder extend connection (spring return cylinder connection)
4
Air feed cable
5
Flow control adjustment
6
Air feed valve
7
Water manual drain
8
Lock out hole
9
¼ Rc supply port
10
Main air shutoff valve
11
Air ON
12
Pressure regulator
To install Air Feed Kit PN 2372210-1, proceed as follows:
DANGER
To avoid personal injury, turn OFF the machine, disconnect it from the power source, and disconnect the air supply to be used
to power the air feed kit.
NOTE
TE drawing
provides additional details for installing the air feed kit.
1. Disconnect power.
2. Remove six screws on the guard.
3. Remove rear panel.
4. Mount the air feed valve to the inside of the rear panel.
5. Reinstall the rear panel.
6. Reinstall the six screws on the rear panel.
7. Attach the air line from the valve to the pressure regulator/shut off valve.
