Audio Outputs
Monitor Speaker
The RZ6 is equipped with an onboard monitor
speaker, provided for audio monitoring of a
single channel. A switch located directly to the
left of the monitor speaker is used to select
between DAC channels A and B or to disable the
monitor speaker. The monitor speaker output level is controlled by the Mon Level knob located
directly to the right of the monitor stereo output.
Electrostatic Speaker Output
An onboard two channel broadband electrostatic
speaker driver is provided, allowing direct connection
of TDT's ES series electrostatic speakers. The driver
produces
fl
at frequency responses reaching far into
the ultrasonic range, can drive two ES series speakers,
and is powered using the onboard power supply. A
switch located directly to the left of the two 4-pin, mini-DIN connectors is used to enable or
disable output of DAC channels A and B.
All outputs use stereo power ampli
fi
ers
Note
RZ6 Multi I/O Processor | 14
