C-M-G
Series
Manual
© TDT GmbH
Chapter 11: CLI Commands
Seite 107 von 136
11 CLI Commands
Command
Description
?
With a question mark the commands can be displayed in the just
active part of the menu.
<command> ?
Shows current value for <command>
quit
This command will terminate the CLI
exit
Leaves current command level and returns to the next higher
level.
At top level the cli can be closed with
exit
.
Important!
To save changes permanently, it is always necessary to complete a Perma-
nent Save in top level with the instruction
write
, otherwise the settings
will be lost in the case that the router performs a reboot or due to power-
fail.
11.1 Top level - TDT(CLI)
Command
Description
configuration
Enter configuration menu
status
Enter status information
write
Save configuration permanent to flashdisk
save <filename>
Save configuration as textfile to
/tmp
load <filename>
Load configuration from textfile in
/tmp
Important!
All existing settings will be lost during this process.
include <filename>
Include Configuration from textfile in
/tmp
and add it to existing
configuration.
Important!
Existing settings will be overwritten with the new
parameters.
reboot
Reboot system
shutdown
Shutdown system
halt
Shutdown system immediately
