User Manual
Chapter 3 - Description, Components and Specifications 13
Chapter 3 - Description, Components and Specifications
3.1. Storage and transport
3.1.1. General
DVS drives are carefully packed for shipment. Transport must be undertaken using adequate means (see weights). Respect
all instructions and symbols printed on the packaging. The same applies to drives removed from their transport packaging for
installation in control cabinets.
Perform the following checks as soon as you receive your drive.
-
Check that the packaging has not been visibly damaged.
-
Check that the details on the delivery bill correspond to those of the original order.
Unpack the drive carefully and perform the following checks.
-
Check that no part of the drive has been damaged during transport.
-
Check that the drive delivered corrsponds to that ordered.
If any damage is found, or if the drive is either incomplete or incorrect, notify the suppliers sales department
immediately
.
The drive must only be stored in dry places and within the specified storage temperature range.
N
OTA
!
Excessive temperature variations can cause condensation to form inside the drive. While this may be
acceptable under certain storage conditions (see section 3.3.1 Ambient conditions and standards),
the presence of condensation is absolutely unacceptable under normal drive operating conditions. Before
powering your drive on for the first time, always make sure that there is no condensation inside it!
