Steel Bistro Table
4
Item #21242
Steel Bistro Table
Item #21242
5
Customer
Service
1-800-599-8898
Customer
Service
1-800-599-8898
Step 1:
Assembly Instructions
B
B
E
H
A
A
Insert two Screws M6x35 (G) through Washers (H), through Leg (B), and into Leg
Support (D). Place Pole (C) in between Leg Support (D) and Table (A) so that it lines
up with the hole in the center of the table. Insert two Screws M6x25 (F) through
Washers (H) and through the center of Leg Support (D); tighten down with Nut (I).
Tighten all screws that have been left loose throughout the building process.
Place Table (A) upside down on the ground. Insert two Screws M6x15 (E) through
Washers (H), through Leg (B), and into Table (A); tighten about ¾ the way down. It
is advised to keep all parts loose until unit is completely assembled. Follow this to
assemble remaining Legs (B) to table (A).
B
B
C
L
I
D
H
F
H
G
D
C
D
Turn assembled table right-side-up. Insert Table Ring (J) through center hole of Table
(A) and into Pole (C).
Place both Tiles (M) into their designated rims of Leg Support (D).
Step 2:
Step 3:
Assembly Instructions
J
A
M
D
C
