16
17
2800 Laura Lane • Middleton, WI 53562
|
800.288.9383
|
www.tcsbasys.com
Building Automation Systems
16
17
Gateway Configuration
IMPORTANT:
The Gateway Configuration section is for customers who did not
order their QWL2040 Panel preconfigured by TCS,or who need to reconfigure their
unit. If you ordered your QWL2040 Panel preconfigured by TCS, which is typical, you
can skip this section and jump to
Lighting/Pulse Meter Programming on page 24
!
Introduction to Gateway Configuration
The QWL2040 Panel utilizes an internal Gateway to communicate with Ubiquity Cloud and the attached device networks.
This Gateway can be configured locally by connecting a laptop directly to the device, or by connecting a monitor and
keyboard. When using a laptop, you can configure the Gateway through the Panel’s internal web page. When using a
monitor and keyboard, you can configure the Gateway via the text-based Command Line Interface (CLI).
NOTE:
All Ubiquity Cloud services are accessed by logging into the Ubiquity Cloud Server (
www.ubiquitysystems.net
),
not by using the internal Gateway.
The Gateway is preconfigured with a default login and password, which is supplied to customers upon request. It is the
customer’s responsibility to configure a custom login and password. Contact TCS Technical Support (800.288.9383, ext.
2) for information on managing Gateway login credentials.
Gateway Configuration Via Laptop
Once you have made a connection and have logged in (see
Appendix A: Local Management Port on page
) you can
configure the operation of the unit by selecting the proper parameters for your application.
If you are unable to access the configuration page, contact TCS Technical Support (800.288.9383, ext. 2) for assistance.
Installation Information
The Hardware Identity section contains unit-related information used to uniquely identify the unit when it is being serviced
in the field.
NOTE:
Model and submodel numbers can reference revision suffixes that do not affect user operation but may be useful
when troubleshooting with TCS Technical Support.
The Software Status section contains software/application-related information that identifies the level of patching
of the unit. The Site Time is used by the local network and the Panel until the Ubiquity Cloud Server performs a time
synchronization with the site.
NOTE:
Be sure to set the correct time zone so that the site will correctly adjust the time during future time
synchronizations with Ubiquity Cloud.
Once you are finished entering information in this section, click the Update Installation Info button.