2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
8
9
8
9
Configuration
Configuration
Introduction
The QD3041 utilizes an internal Gateway to communicate with Ubiquity Cloud and the attached device networks. This
Gateway can be configured locally by connecting a laptop directly to the unit, or by connecting a monitor and keyboard.
When using a laptop, you can configure the Gateway through the QD3041’s internal web page. When using a monitor and
keyboard, you can configure the Gateway via the text-based Command Line Interface (CLI).
NOTE:
All Ubiquity Cloud services are accessed by logging into the Ubiquity Cloud Server (
www.ubiquitysystems.net
),
not by using the internal web page.
The QD3041 has a default Gateway login and password, which is supplied to customers upon request. It is the custom-
er’s responsibility to configure a custom login and password. Contact TCS Technical Support (800-288-9383, ext. 2) for
information on managing login credentials.
QD3041 Configuration via Laptop
Once you have made a connection and have logged in (see
“Appendix A: Local Management Port” on page
configure the operation of the unit.
If you are unable to access the configuration page, contact TCS Technical Support (800-288-9383, ext. 2) for assistance.
Installation Information
The BACnet Device Properties section contains unit-related information used to uniquely identify the unit when it is being
serviced in the field. It also contains software/application-related information such as the software version and patch
level.
Installation Information
IMPORTANT:
If you ordered your QD3041 preconfigured, which is typical, you can skip this section!
The Configuration section is for those who need to configure or reconfigure their unit.
