12
11/2012
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
Mail: [email protected]
PI_PUK-uk 1 A
3
End
Power supply and control unit
press shortly LED is ON
programming mode of the system is OFF
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station.
The programming lock can only be removed with the Service Device TCSK-01 or the configuration software configo
TM
.
Delete the programming
Before an already programmed bell button can be reprogrammed, the previous program-
ming must be deleted.
1
Initiate
Power supply and control unit
press shortly
LED blinks
programming mode of the system is ON
2
Delete button
press until the delete melody sounds
1)
release
3
End
Power supply and control unit
press shortly
LED is ON
programming mode of the system is OFF
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station.
The programming lock can only be removed with the Service Device TCSK-01 or the configuration software configoTM.
