01/2013
15
TCS TürControlSysteme AG, TCS Hotline Deutschland: +49 (0) 41 94/ 9 88 11 88
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
Mail: [email protected]
PI_K30001-30004_uk 1A
Settings
Connect the PC keypad
To loosen the covering you need an allen key SW 3 (not included in the delivery).
Set the display contrast
With the buttons F11/F12 the contrast of the display can be set in
48 steps:
Reduce the contrast
Repeat pressing the F11 button on the PC keypad until the required
contrast is adjusted.
The font appears brighter.
Increase the contrast
Repeat pressing the F12 button on the PC keypad until the required
contrast is adjusted.
The font appears darker.
ex works: middle position
Set the volume
This function can only be used when a voice connection is already established. It is
used to set the volume of microphone and loudspeaker.
The volumes should be set only after you have entered the resident data.
!
For setting and programming you need a standard PC keypad with PS/2 connection
(not enclosed in the delivery)!
The volumes are set on an average value ex works. A modification is not always neces-
sary. Please ensure when setting the volumes: The enhancement of loudspeaker and mi-
crophone cannot be set independently from each other. If the volumes are too high, a
feedback effect appears (whistling).
