07/2015
7
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
PI_ISW3330-uk 2 A
Is ON green:
indication of an incoming door call or internal call (ex-
pices at the start of a BW (assisted living) action or
grouped announcement, timeout 30 sec)
indication of a voice connection (with central or hands-
free talking to a front-door or indoor station)
flashes
orange:
device or connection error
Volume control for
voice output and ring
tone
Adjustability is deactivated; the volume is set to maxi-
mum.
The volume can only be set at the central (via the user
program call central).
Floor push button
Shortly press:
Calling
Sending of a floor call (also sending a control function
8, which can be configured with an own unique serial
number). Acknowledgement signal (or floor ring tone
depending on the configuration) and lighting bar shortly
lights up red.
!
The floor push button cannot be used for call ac-
ceptance and to allow listen-in into rooms.
Short description
manually controlled duplex communication, speech direction is determined by central
large call button
no door release button and no call-OFF button
optical indication by lightning bar
connection option for a floor push button and built-in option for a radio receiver board
up to 5 radio sensors can be trained
!
When planning the system, please observe that a radio transmission can be limited
geographically or can also be disturbed.
listen-in into rooms can be implemented when a resident calls the central
allocation of the device to 3 announcement groups possible
ring tone can be selected out of a pool of 16 ring tones, only with configuration software
con
figo™
voice volume and ring tone volume are deactivated, always max. volume
optical and acoustic error signaling (can be switched ON / OFF)
programming with configuration
software configo™ or user program call central
reproduction of loud tones followed by an announcement
indication of a busy line during a voice connection
audio privacy function and automatic call cut-OFF (after 2 min)
can be functional extended due to installation locations for call relays