07/2015
11
TCS TürControlSysteme AG, TCS Hotline Germany: [email protected]
Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129
PI_ISW3330-uk 2 A
Installation of extended functions
Built-in call relay TRE1-EB/1
Radio receiver board 0022930
The plug for the radio receiver board is located
on the PCB in the upper cover of the special
function module.
Push the contact pins of the radio receiver
board into the designated socket (position see
adjoining illustration).
Ensure that all six pins of the plug of the small
PCB are plugged into the socket.
Position the cable antenna that it is not
clamped when snapping-on the upper cover
and fix it with the adhesive pad (
1
).
Please observe the product information of each extended function.
Train radio sensors
Training radio sensors can be implemented currently only with the configuration software
con
figo™ (as of version 1.7.x).
Plug to both
contacts.
1
