TCS FBI4500-0100, Product Information

Page: 11 / 16

11/2012 11
TCS TürControlSysteme AG

TCS Hotline: +49 (0) 41 94 / 98 81 188 Subject to technical changes.
FAX: +49 (0) 41 94 / 98 81 29

Mail: hotline@tcsag.de PI_FBI4500-0100.doc 2A
Preposition of a camera
The following settings can be realised with the configuration software configo
TM
as of ver-
sion 1.7.x.
Setup preposition

Start the configuration software
configo™ and create an FBI4500 in your project. Open
the device in con
figo™.

Activate the image of an indoor station to set up the required image section.

With the control keys (resp. navigation buttons) of this indoor station you can move the
PTZ camera into the required direction (and the required zoom, as far as possible),
or: move the camera directly via
configo™.

To store the preposition in the PTZ camera, press the button
“Store preset x“.
Delete prepositions

Start the configuration softw
are configo™.

Open the device FBI4500 within the
configo™.

To delete the preposition in the PTZ camera, press the button
“Delete preset x“.
Operation

With the control keys (resp. navigation buttons) LEFT, RIGHT, UP, DOWN at the video
indoor station you can move to the stored pre-position .
Note:
If a video image was activated and a pre-position selected, the visible image section remains the
same if, at the same time, a door call comes in and the call is accepted.