19
A programming with the commands "9" has to be initiated once with the
command *95#Ser.-No.#. Then the programming of the function key is to
be realised with the Service Device.
initiation
call diversion
door release automatic
internal call
control function 8
light switch function
parallel allocation
note: Deactivation of the parallel alloca-
tion corresponds to the parallel allocation
to serial number 0.
ser. no. =
the serial number of the indoor station that is to be configured new
TarSerNo. =
the serial number of the indoor station, to which the call is to be diverted
IntSerNo. =
the serial number of the indoor station, which is to be called internally
ParSNo. =
the serial number of the indoor station, to which the new configured indoor
station is allocated
General information on the OSD menu
The navigation within the OSD menu, the image buffer indication and
live image are realised via the navigation buttons UP and DOWN.
In delivery state, not all possible functions are configured. Symbols in
the ODS menu are only displayed when the specific function was con-
figured (image storing settings and short messages).
!
To activate the image storage functions and short messages the
configuration software configo™ is necessary!
The live image is activated by pressing the image button or the speech
button or when receiving a door call.
The live image is deactivated automatically after 80 sec without any
activity, by ending the voice connection or when a video channel is
used by another device (not in case of a voice connection).
