24
Press the menu button. Select the sym-
bol
Send control function
.
Or call up
the menu with the function key when the
device is configured appropriately.
Select the required function with the nav-
igation buttons UP or DOWN.
Triggering by pressing the menu button.
A positive acknowledgement tone
sounds. The OSD is deactivated after 5
sec (or switches back to the live image).
Send internal call
Press the menu button. Select the sym-
bol Send internal call. Select the required
call destination with the navigation but-
tons UP or DOWN.
Trigger a call by pressing the menu but-
ton. A positive acknowledgement tone
sounds. The OSD is deactivated (or
switches back to the live image).
When the call is accepted at the indoor
station, another acknowledgement tone
sounds.
Receive internal call
When the indoor station receives an in-
ternal call with sender serial number, the
number is displayed.
If the name of the calling indoor station is
programmed (via configuration software
configo™), the name is displayed.
