18
Settings
Factory settings
AS-address dependent image activation
If there are also front-door stations without cameras within a system with
CAI20x0 and video front-door stations, the image is not activated when
the CAI20x0 is called by an audio front-door station.
To guarantee this function, the possible AS addresses are separated into
two sections:
AS address
0
– 31*
reserved for video front-
door stations
the image is activated in
case of a door call (from
max. 16 video front-door
stations)
AS address
as of 32*
free, for front-door stations
without camera
the image is not activated
in case of a door call
*) The video AS-border can be configured with the configurator configo
TM
.
Note
:
The AS-addresses of the front-door stations have to be assigned via the Service Device.
For detailed information see section Service information
in the TCS Installer 5 / 4
(Version 1)
or
TCS
Installer 7 / 4
(Version 2).
The device is equipped with am EEPROM which stores the following fac-
tory settings:
serial number for parallel call
1000000
function key
light switch button
Pre-adjusted times
communication time
2 min
remaining conversation time after pressing
the door opener
4 sec
image switch time
80 sec
blinking period of the green LED, when
"video/speech channel is busy" when press-
ing the reverse key for speaking/hearing or
pressing the image button
3 sec
3 x flashing
internal standby time
around 30
s
floor door release time
around 30 s
timeout menu ring tone parameter
10 sec
timeout menu image parameter
10 sec
