6
11/2012
TCS TürControlSysteme AG,
www.tcsag.de
Subject to technical changes
TCS Hotline • Mail: [email protected]
PI_AVU940x0-uk
Install the flush-mount box
Guide the connection lines through the cable conduit in the flush-mount box and fix the
box with suitable screws to the wall.
The front-door station should be flush with the wall.
Open the front-door station: the win:clip
TM
system
The device is equipped with the win:clip
TM
system
.
Opening and closing can be realised
without any screws.
Open the housing
1.
Push the enclosed win:clip
TM
key into the small ope-
ning in the loudspeaker cover.
Press the key into the opening up to the stop and
keep it in this position.
2.
Push the name plate glass slightly upwards until it
jumps out.
3.
Remove the glass.
4.
Remove the win:clip
TM
key.
Close the housing
1.
Push the enclosed win:clip
TM
key into the small
opening in the loudspeaker cover.
Press the key into the opening up to the stop and
keep it in this position.
2.
Push the name plate glass under the loudspeker
cover.
3.
Press the name plate glass onto the device and
push it slightly downwards until it snaps-in.
4.
Remove the win:clip
TM
key.
!
Do not seal the device with silicon under any circumstances! Condensed water must
be able to run off and evaporate.
