
10
11/2012
TCS TürControlSysteme AG,
www.tcsag.de
Subject to technical changes
TCS Hotline • Mail: hotline@tcsag.de
PI_AVU940x0-uk
Commissioning
Install the devices of the system and network completely.
Check the wires against each other for short-circuits.
Switch on the voltage supply. After switching on the voltage supply, the front-door sta-
tion starts automatically.
The configuration of the front-door station is realised with the help of the integrated web
interfaces
.
Notes
!
The front-door station restarts automatically after a voltage interruption.
!
Switching off the power supply during a storage process or software update can cause
a loss of data or a device defect.
Set the volume
!
Use the enclosed small screwdriver for setting the potentiometer!
name
function
threshold value
camera illuminati-
on
Set the brightness-dependent switching threshold for the
camera illumination.
volume
loudspeaker
The volumes are set to an average value ex works. A
change is not always necessary.
Observe when setting: increasing the loudspeaker and
the microphone cannot be realised independently from
each other. If the volumes are too large, there will be a
feedback effect (whistling).
volume
microphone
echo / noise supp-
ression
Setting option for the level of the echo / noise suppres-
sion