10
XXXXXXXXX
Step.3:.
Setting up a Wi-Fi connection
•. Setting.up.a.Wi-Fi.connection.manually:
1) From your Wi-Fi enabled client, perform a scan for wireless networks.
2) Connect to the network name that matches the SSID found on the device
label.
3) When prompted for a password, enter the Wi-Fi key found on the
device label (this is case sensitive). Your client will notify you when it is
connected.
•. Setting.up.a.Wi-Fi.connection.through.WPS:
Your client must support WPS, Ensure that Wi-Fi is enabled on the client and
enable WPS.
1) Open the WPS page on your Web User Interface (Go to
Wireless.
>
WPS
).
2) Open the
WPS.Function
switch and click
Apply
.
3) Press and hold the WPS button for 3 seconds. The Wi-Fi LED will begin to
flash blue.
4) Your device should then connect automatically.
3.
Configuring.your.Cat4.Router
There are two ways to configure your Cat4 Router.
•
Link Hub app
•
Web page
3.1
Configure.your.Cat4.Router.via.application
1) Download the free Alcatel Wi-Fi Link app to control your Cat4 Router.
2) Make sure your device is connected to the internet.
Summary of Contents for HH42NK
Page 1: ...User Manual ...