TCL 55D1620, Manual

Page: 8 / 42

Factory Test & Alignment Specification For MT56 Series (V1.0)
6

MID
2.2 Factory Menu
Factory Menu
Name
Default Description
Factory hotkey OFF
Factory Menu shortcut button switch
The item must be disabled (OFF) after production
Warm up OFF
Aging mode, mainly used for factory aging.
Press “
Menu
” key on keyboard to exit the burning mode.
See Appendix 1
“Warm-up Test”
White Balance ..
White Balance Adjustment ( see details below)
Shop >
It is crucial that the function is executed after production aim to clear information
of production process, ensure user cannot access to Factory Menu after
executing the item.
NVM Reset >
Restore default value except White Balance, ADC data.
Power On Mode STANDBY
ON: the set will power on after switching on power.
STANDBY: the set will remain standby status after switching on power.
LAST: the set will turn to the status in which it lies when last switching off.
If without requirement from certain customer, by default, the Setting should be
STANDBY
USB Clone ..
Select to choose the things you want to clone.
Preset Factory
Channel
..
Preset the channel table of factory. To preset the channel table of certain factory,
first, choose the corresponding factory name. Then press OK button of remote
control and wait OK is displayed on the screen.
DeviceID test DO
Test device ID.
Other
Project Information
ADC ..
Analog To Digital Converter
SW NO. device info
Version information of Main Software
Project Name device info
Product model
Date device info
Release date and time of main software