6
Connections and Setup
Explanation of Jacks on TV
This section describes the jacks on the side/back panel of your TV. There are several ways to connect
components.
Y/VIDEO
P
R
P
B
AUDIO L
R
COMPONENT IN (CMPT)
AUDIO/VIDEO IN (AV)
COMPONENT IN (CMPT):
Lets you connect a component that has component video jacks, such as a DVD
player or set-top box. ( Green jack for Y, Blue jack for Pb and Red jack for Pr )
•
Y Pb Pr (Component Video):
Provides good picture quality because the video is separated into three
signals. Use three video-grade or component video cables for the connection.
•
L/R AUDIO:
Provides left and right audio connection when using the CMPT VIDEO input.
Red and white
jacks for R AUDIO and L AUDIO connection.(
Note: AV IN
and
COMPONENT IN
share the same
L/R
AUDIO and Y/Video
input jacks.)
AUDIO/VIDEO IN (AV IN):
Lets you connect a component that has composite video jacks, such as a VCR,
DVD player or set-top box. Green jack for VIDEO connection, red and white jacks for R AUDIO and L AUDIO
connection.
Buttons on TV
You can operate this TV using buttons on the side of panel.
CH-/+
Selects channels stored in the channel list or acts as the
down/up arrow (▼/▲) through the menu items.
VOL-/+
Decreases/Increases the volume or acts as the left/right
arrow (◄/►) through the menu items.
VOL+
also acts as the
OK
button when in the menu system.
MENU
Brings up the TV’s main menu.
INPUT
Selects the signal source.
(
POWER
button) Turns the TV on or to standby mode.
