background image

EN

1

English

Important information

Safety

Ensure that your domestic mains supply voltage 

matches the voltage indicated on the identification 

sticker located at the back of your set. Where the 

mains plug, AC inlet or an appliance coupler is used 

as disconnect device, it shall remain readily operable.
On certain models, the light indicator is located at the 

side of the TV set. The absence of a light indication 

at the front does not mean that the TV set is fully 

disconnected from the mains. To disconnect the TV 

set completely, the mains plug must be pulled out.
The TV set’s components are sensitive to heat. The 

maximum ambient temperature

 should not exceed 

35º

 Celsius. Do not cover the vents at the back or 

sides of the TV set. Leave sufficient space around it to 

allow adequate ventilation. Install the appliance away 

from any source of heat (fireplace, etc.) or appliances 

creating strong magnetic or electric fields.

Moisture

 in rooms where the set is installed should 

not exceed 

75%

 humidity. Moving the set from a cold 

place to a warm one can cause condensation on the 

screen (and on some components inside the TV set). 

Let the condensation evaporate before switching the 

TV set on again.
The   or 

POWER/

 button on the TV set or the   

button on the remote control can be used to switch it 

on and put it into standby mode. If you are 

not going 

to be watching the TV for a lengthy period of time

switch it off completely by removing the plug from the 

mains power socket.
During 

thunderstorms

, we recommend that you 

disconnect the TV set from the mains and aerial so 

that it is not affected by electrical or electromagnetic 

surges that could damage it. For this reason, keep the 

mains and aerial sockets

 accessible so they can be 

disconnected

, if necessary.

Unplug

 the TV set immediately if you notice it giving 

off a 

smell of burning

 or 

smoke

. You must never, 

under any circumstances, open the TV set yourself, 

as you run the risk of an 

electric shock

 in doing so.

WARNINGS

This appliance is intended for domestic household 

use only and should not be used for any other 

application, such as for non-domestic use or in a 

commercial environment.

If the external flexible cable or cord of this product is 

damaged, it shall be replaced by the manufacturer or 

his service agent or a similar qualified person in order 

to avoid a hazard.
Leave more than 10cm clearance around the 

television to allow adequate ventilation. The 

ventilation should not be impeded by covering the 

ventilation openings with items, such as newspapers, 

table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or 

splashing and no objects filled with liquids, such as 

vases shall be placed on the apparatus.

Batteries (battery pack or batteries installed) shall not 

be exposed to excessive heat such as sunshine, fire 

or the like.

To reduce the risk of fire or electric shock, do not 

expose this apparatus to rain or moisture.
Never place a television set in an unstable location. A 

television set may fall, causing serious personal injury 

or death. Many injuries, particularly to children, can 

be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the 

manufacturer of the television set.

• Only using furniture that can safely support the 

television set.

• Ensuring the television set is not overhanging the 

edge of the supporting furniture.

• Not placing the television set on tall furniture 

(for example, cupboards or bookcases) without 

anchoring both the furniture and the television set to 

a suitable support.

• Not placing the television set on cloth or other 

materials that may be located between the television 

set and supporting furniture.

• Educating children about the dangers of climbing on 

furniture to reach the television set or its controls.

If your existing television set is being retained and 

relocated, the same considerations as above should 

be applied.

Equipment with this symbol is a Class II or 

double insulated electrical appliance. It has 

been designed in such a way that it does 

not require a safety connection to electrical 

earth.

Equipment without this symbol is a Class I 

electrical appliance. It shall be connected 

to a mains socket outlet with a protective 

earthing connection.

To prevent the spread of fire, keep candles 

or other open flames away from this product 

at all times.
This symbol indicates that high voltage is 

present inside. It is dangerous to make any 

kind of contact with any internal part of this 

product.

N

This symbol indicates that the fuse may 

be in the neutral, and that the mains shall 

be disconnected to de-energize the phase 

conductors.

Summary of Contents for 32D4300
















Reviews: