6.4
Connect via UPnP
Universal Plug and Play (UPnP) support is enabled by default on the BC840-MC. With the UPnP
service enabled in Windows (see Appendix: Enable UPnP in Windows), you can access the unit
from Windows Explorer.
To connect to the unit via UPnP
1
In Windows Explorer, open the Network folder.
Detected devices in the same subnet as the computer are displayed, including TKH
Security codecs and cameras with UPnP support.
2
Double-click the BC840-MC,
- or -
Right-click the unit, and then click View device webpage.
The login page of the BC840-MC is opened in your web browser.
Connect to a device via Windows Explorer
For more information about UPnP, see Auto Discovery (Device Management chapter).
6.5
Log on to the unit
Users with a valid account for the BC840-MC can log on to the unit.
To log on to the BC840-MC
1
On the Login page, click LOGIN.
2
Log on with the account that was created for you.
User name and password are case sensitive.
The default user name set at the factory for the BC840-MC is "Admin" with password
"1234".
Access the webpages
23
