TC Electronic UpCon, Manual

Page: 85 / 114

Icon Setup
UpCon English Manual (2014-10-07) 82
This chapter covers screens and parameters of
the TC Icon software not directly related to the
day-to-day operation of your UpCon.
Accessing the Icon Setup pages
►
If it isn’t already, switch the TC
Icon software to Base mode by
clicking the Icon symbol in the
upper left corner of the window
– see “TC Icon modes: Base and
Device operation” on page 39.
In Base Mode, you will see the
Select, Auto and Setup tabs on
the upper edge of the TC Icon
window.
►
Select Setup.
►
Select one of the pages described in the fol-
lowing sections of this manual.
Info page
On this page, the version number of the currently
installed TC Icon software is displayed.
To update the TC Icon software, please refer to
the “Updating UpCon software” on page 36
section of this manual.