T C E L E C T R O N I C A / S , S I N D A L S V E J 3 4 , D K - 8 2 4 0 R I S S K O V, D E N M A R K á P H O N E : + 4 5 8 6 2 1 7 5 9 9 á F A X : + 4 5 8 6 2 1 7 5 9 8
E M A I L : I N F O @ T C E L E C T R O N I C . C O M á H T T P : / / W W W. T C E L E C T R O N I C . C O M
TC ELECTRONIC INC., 790-H HAMPSHIRE ROAD, WESTLAKE VILLAGE, CA 91361, USA á PHONE: (805) 373 1828 á FAX: (805) 379 2648
T E C H N I C A L S P E C I F I C A T I O N S :
DIGITAL INPUTS AND OUTPUTS
Connectors:
Formats:
Output Dither:
Sample Rates:
Processing Delay:
Frequency Response DIO:
Compressor THD+N:
ANALOG INPUTS
Connectors:
Impedance:
Max. Input Level:
Min. Input Level (for 0 dBFS):
Sensitivity:
A to D Conversion:
A to D Delay:
Dynamic Range:
THD:
Frequency Response:
Crosstalk:
ANALOG OUTPUTS
Connectors:
Impedance:
Max. Output Level:
Full Scale Output Range:
D to A Conversion:
D to A Delay:
Dynamic Range:
THD:
Frequency Response:
Crosstalk:
XLR (AES/EBU) RCA Phono (S/PDIF)
Optical (Toslink)
AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340,
IEC 958, EIAJ Optical (Toslink)
HPF TPDF dither 16, 20 and 24 bit
44.1 kHz, 48 kHz
0.2 ms @ 48 kHz
DC to 23,9 kHz ± 0,01 dB @ 48 kHz
-122 dB (0,00008%) @ 10 dB Compression,
20 Hz to 20 kHz
XLR balanced (pin 2 hot)
20 kohm
+22 dBu (balanced)
-10 dBu
@ 12 dB headroom: -22 dBu to +10 dBu
24 bit (1 bit, 128 times oversampling)
0.8 ms @ 48 kHz
>103 dB (unweighted), >106 dB(A)
-95 dB (0,0018 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
10 Hz to 20 kHz: +0/-0.2 dB
<-80 dB, 10 Hz to 20 kHz typical Ð100 dB @ 1 kHz
XLR balanced (pin 2 hot)
100 ohm (active transformer)
+22 dBu (balanced)
-10 dBu to +22 dBu
24 bit (1 bit, 128 times oversampling)
0.57 ms @ 48 kHz
>100 dB (unweighted), >104 dB(A)
-86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
10 Hz to 20 kHz: +0/-0.5 dB
<-60 dB, 10 Hz to 20 kHz
typical Ð90 dB @ 1 kHz
EN 55103-1 and EN 55103-2, FCC part 15, Class B,
CISPR 22, Class B
IEC 65, EN 60065, UL 1419 and CSA E65
32¡ F to 122¡ F (0¡ C to 50¡ C)
-22¡ F to 167¡ F (-30¡ C to 70¡ C)
Max. 90 % non-condensing
PC Card, 68 pin type 1 cards
PCMCIA 2.0, JEIDA 4.0
Supports up to 2 MB SRAM
In/Out/Thru: 5 Pin DIN
Phone jack, 0 ohm to 50 kohm
Anodized aluminum front
Plated and painted steel chassis
19Ó x 1.75Ó x 8.2Ó (483 x 44 x 208 mm)
5.2 lb. (2.35 kg)
100 to 240 VAC, 50 to 60 Hz (auto-select)
< 20 W
> 10 years
EMC
Complies with:
SAFETY
Certified to:
ENVIRONMENT
Operating Temperature:
Storage Temperature:
Humidity:
PCMCIA INTERFACE
Connector:
Standards:
Card Format:
CONTROL INTERFACE
MIDI:
GPI, Pedal, Fader:
GENERAL
Finish:
Dimensions
Weight:
Mains Voltage:
Power Consumption:
Backup Battery Life:
THINK FAST
DELIVER THE HEAVYWEIGHT MASTERING PUNCH
THINK FAST
DELIVER THE HEAVYWEIGHT MASTERING PUNCH
Introducing
Finalizerª
Express
Introducing
Finalizerª
Express
The Finalizer Express is the fast and efficient
way to turn your mix into a Professional Master!
Based upon TC's Multi-Award winning Finalizer
Mastering Technology, it delivers the finishing
touches of clarity, warmth and punch to your
mixes, putting the world of professional maste-
ring within your reach...
OPTIONAL DIGITAL MASTER FADER AVAILABLE
Note:
Due to continuous development and standardization all specifications
are subject to change without notice
The internal auto-sensing
power supply automatically
accepts and adjusts itself
to 100-240V, 50/60Hz.
The MIDI section in the
Finalizer is very useful
for controlling fades
from a sequencer.
Analog balanced I/O.
Optional Digital
Master Fader
connection.
ADD THE FINAL PUNCH TO YOUR MIX
ADD THE FINAL PUNCH TO YOUR MIX
FinalBrochureUS98.QXD 11/09/98 14:14 Side 4
