Chapter 3 Management through the Web
Simple Network Management Protocol (SNMP) Settings
3-20
TC8518 Rev 2.2 User Manual
Figure 3-17 Web Application - Advanced - Upgrade from a Network PC
3.7
Simple Network Management Protocol (SNMP)
Settings
The SNMP page allows the user to enable/disable SNMP management and
configure settings. Please refer to Figure 3-18,
Web Application - Simple Network
Management Protocol (SNMP) Page
.
Read-Only Community Name:
Displays the current Read-Only Community
Name. It can be user-defined. A SNMP management software with the Read-Only
Community Name is granted authorization to view TC8518 values.
Read-Write Community Name:
Displays the current Read-Write Community
Name. It can be user-defined. Any SNMP management software with the Read-
Write Community Name is granted authorization to read and configure any TC8518
values.
Trusted Peer:
The user can define a specific IP address or a subnet of IP addresses
that are authorized to use a SNMP management software to manage the TC8518.
SNMP Traps:
Enable/Disable SNMP to send traps to a SNMP management
software when an error is triggered.