Chapter 2 Installation
Quick-Start Guide
TC8518 Rev 2.2 User Manual
2-5
•
The phone ports (RJ-11) on the expansion card are accessed using 2-wire
phone cable.
Table 2-3: Cable Configurations
RJ-45 Ethernet Connection
RJ-45 to DB-9 (Included in
the Package)
RJ48-to-BNC Adapter (For
E1 Only) Optional
2.7
Quick-Start Guide
This section describes the basic TC8518 configuration and setup.
Power On:
When power is initially connected to the TC8518, the Power, Alarm, Optic LEDs
will light solid or flash for a few minutes, T1/E1 channel LEDs will light in a
rotating pattern, and the alarm buzzer will sound. Once the unit finishes booting up,
the buzzer will stop and the T1/E1 LEDs will stop rotating.
2.7.1
Installation Procedure Summary
The TC8518 is designed for quick and easy installation.
1. Prepare a PC to have the following settings: set the IP address to be in the
192.168.1.x range, for example, 192.168.1.50. The subnet mask should be
255.255.255.0. Using a CAT-5 cable, connect the PC to a TC8518 Ethernet port;
with a web browser, enter http://192.168.1.1/; login with username "
admin
" and
password "
admin
".
