Usage
External module
If you want to use your MAMBO with an external JR-style module like the TBS CROSSFIRE you need to open
the cover on the back by pushing the two clips to the middle and slide in your module.
Now enable the external module in the model settings and select the correct protocol type for your
module. For the TBS CROSSFIRE, you need to use it to CRSF.
If you use a CROSSFIRE standard/ Lite TX at 2W make sure
dynamic power
is enabled or /and you use
an external LiPo to power the module. Otherwise, the battery life will be greatly reduced!
CROSSFIRE must be on FW6.07
27
Summary of Contents for TBS TRACER
Page 41: ...41...
