5
Photo of SWB 1” servo arm using the innermost hole.
7) 12’ of “one wrap” Velcro (TBM part # TBMVelcro)
8) Overflow fitting (TBM part# TBMoverflowfitting)
9) Air trap/Bubbleless Fuel Tank (TBM part # TBMBFT)
10) Hysol or Epoxy
11) Two 48” servo extensions for the elevators
12) Two 36” servo extensions and a Y-harness or two 48” servo extensions for the rudders
13) Two 24” servo extensions for the ailerons
14) Two 12” servo extensions for the flaps
15) Several servo plug clips which prevent plugs coming apart (TBM part# MPIclip or PPMJP)
16) Servo mounting screws
QUICK BUILD INSTRUCTIONS (for those in a hurry)
1) Join fuselage halves
2) Install fuel tanks
3) Install all servos control horns and control surfaces
4) Install landing gear
5) Install turbine
Summary of Contents for DV8R
