X4 AC Drive User’s Manual
Chapter 7: X4 Parameters
1428D-0607
- 50 -
© 2007 TB Wood’s All Rights Reserved
7.3
Description of Parameters
Table 7-2 lists the X4 parameters in the order in which they appear in the keypad display. For each
parameter, the table lists the default value and range and also describes the use of the parameter.
Table 7-2: Description of X4 Parameters (Page 1 of 26)
001 Model Number
Read-Only
Range: n/a
Level: 1,2
Parameter 001, the Model Number parameter, contains the portion of the X4 model number related to voltage and
horsepower. The number format is vvhhf, where vv is the code for the input voltage (19=115 Vac single-phase; 20=230
Vac, three-phase; 40=460 Vac, three-phase; 50=575 Vac, three-phase); hh is horsepower; and f is the fractional part
of the horsepower. Example: 20020 = 230 Vac, three-phase, 2.0 HP model.
002 Software Rev
Read-Only
Range: 0.00-99.99
Level: 2
Parameter 002, the Software Revision parameter, displays the software revision that is installed in the drive.
Options: 0.00-99.99
003 Rated Current
Read-Only
Range: 0.0-200.0 A
Level: 2
Parameter 003, the Rated Current parameter, displays the normal duty current rating of the model of drive.
005 Serial No 1
Read-Only
Range: 0-65535
Level: 2
Parameter 005, Serial No 1, contains a number that corresponds to the year and week in which the drive was
manufactured.
006 Serial No 2
Read-Only
Range: 0-65535
Level: 2
Parameter 006, Serial No 2, contains a number that determines the number of the drive that was manufactured during
the week of Serial No 1.
Options: 0.00-99.99
010 Last Fault
Read-Only
Range: n/a
Level: 1,2
Parameter 010, Last Fault, lists the fault that occurred most recently.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 83.
025 4th Fault
Read-Only
Range: n/a
Level: 2
Parameter 025, 4th Fault, lists the fault that occurred 1 before the last fault.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 83.
040 3rd Fault
Read-Only
Range:n/a
Level: 2
Parameter 040, 3rd Fault, lists the fault that occurred 2 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 83.
055 2nd Fault
Read-Only
Range: n/a
Level: 2
Parameter 055, 2nd Fault, lists the fault that occurred 3 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 83.
070 1st Fault
Read-Only
Range:n/a
Level: 2
Parameter 070, 1st Fault, lists the fault that occurred 4 before the last.
For more information, refer to Chapter 8, Troubleshooting, beginning on page 83.