- 27 -
How to form at, integrate and use programs from other sources
A touch on the icon “ABC“ opens the menu to reach and operate
frequency programs generated outside the F-SCAN3. Up to 460 sets, of
up to 30 frequencies each, can be transferred to the “ABC” memory block
using either the softw are F-SCANT3, or a co mmon terminal progra m.
As a factory setting the “ABC” f unction is locked. A release code can be
acquired by email from the factory or from an F-SCAN sales point.
The frequency programs must be w ritten w ith a text editor in the follow ing
format:
(PROGRA MM 1)10,100,1000,10000;
(PROGRA MM 2)20,30,40,50,60,100;
The program name (maximum of 20 characters – letters of the alphabet
only) must be set in parenthesis. It is follow ed by 1 to 30 frequency values,
separated by comma. The end of the sequence has to be marked by a
semicolon “ ; “.
A carriage-return-line-feed = 13-10 must separate the progra m lines.
As soon as the list of frequency programs is generated and transferred to
the F-SCAN3, it can be accessed on the unlocked menu “ABC”.
A touch on the icon opens the
menu “ABC“. The example
chosen for this manual show s
the program number, the
program name and its f irst
frequency. The timer is set for
03:00 minutes, the total time
show s 21:00 minutes for a
program total of 7 frequencies.
Summary of Contents for F-SCAN3 NT
Page 2: ...2...
