96
/
188
3.Fuse box
Caution:
●If the fuse is blown, you must replace the fuse of the same specification. It is forbidden to use wires such as copper or ir
on wire
for direct connection.
●If it is blown after replacement, you need to
troubleshoot the entire vehicle cable before replacing it.
●This vehicle uses a small fuse. The width is about 11mm (0.43in), the length is about 17mm (0.67in), and the thickness is ab
out
4mm(0.16in).
●Use the buzzer file of the multimeter to connect the
exposed metal part of the fuse to judge whether it has been blown, or use
a tool to unplug and observe.
Refer to the previous steps to remove the battery cover and then pull up the fuse box. After opening the fuse box cover,
check whether the fuse is normal.
No.
Name
Function
Specification
①
Main insurance
Protect all circuits
25A
②
ECM
Protect ECM, ECM relay, oil pump relay and other electrical devices
15A
③
Regular power supply
Protect fans, meters, and anti-theft device connectors
15A
④
Hydraulic control unit motor Protect ABS hydraulic control unit motor
25A
⑤
Reserve
-
25A
⑥
Reserve
-
15A
⑦
Hydraulic control unit ECU
Protect the hydraulic control unit
10A
⑧
Light
Protect the headlight
10A
⑨
Reserve
-
15A
⑩
Reserve
-
10A
No.
Name
function
Specification
①
start up
Protection starting circuit
10A
②
ABS
Protect the ABS controller
10A
③
Assistant Protect position lights, turn signals, tail lights, brake lights, license
plate lights, horns, overtaking lights and other lamps
10A
④
Others
Protect the deputy handle switch, Speedometer, windshield, anti-
theft device connector
10A
Summary of Contents for ZONTES 310T-M 2022
