4
EQUIPMENT SAFETY
Important:
•
Turn the power switch OFF and disconnect the dispenser power cord from the wall outlet before cleaning, moving,
or servicing the dispenser.
•
Inspect the dispenser on a regular basis to identify potential problems before they occur.
•
Keep the Dispenser clean.
•
Keep hands away from the accumulator doors and dispenser drums while the Dispenser is operating.
•
Fry baskets may be hot. Pick them up by the handles only.
•
Do not
roll the Dispenser to the back sink for cleaning. This will cause unnecessary wear on the Dispenser.
•
If the power cord is damaged it must be replaced by the manufacturer, or its service agent, or a similarly qualified
person in order to prevent a hazard.
•
Use only the power cord that came with the Dispenser.
Do not
use an extension cord.
•
Do not
modify the power cord.
•
In a safety emergency, immediately disconnect the power cord from the wall outlet.
•
Do not
obstruct access to the wall outlet or place pressure on the power cord.
•
Do not SPRAY THE DISPENSER WITH LIQUID OR SOLVENTS.
It is not sealed against jetting fluids, and
contamination may get into sensitive components. Spraying the Dispenser may void the warranty.
•
Use caution when handling heavy parts such as back and top panels.
•
Always re-install service panels when maintenance is complete.
•
Keep machine upright at all times.
•
Keep ventilation openings in the machine enclosure clear of obstruction.
•
Do not
use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not
drill or otherwise puncture cabinet walls or top.
•
Do not
damage the refrigerant circuit.
•
Do not
use electrical appliances inside the food storage compartments of the machine unless they are of the type
recommended by the manufacturer.
•
Do not
store explosive substances such as aerosol cans with a flammable propellant in this machine.
Summary of Contents for McDonald's R200
Page 50: ...48 ELECTRICAL DIAGRAM Figure 33 ...
Page 56: ...089363 MCD ...
