Taylor C709, Owner'S Manual

Page: 38 / 68

5-16
USER INTERFACE
Models C709 & C717
User Interface
5
System Information
The SYSTEM INFORMATION is displayed on four
separate screens. The first screen contains the control
and software version installed in the machine.
Press the SEL key to advance to the next system
information screen containing the software language
version.
Press the SEL key to advance to the next screen.
Press the SEL key to advance to the system information
screen containing the model bill of material and machine
serial number. Pressing the SEL key again will return to
the Menu list.
Current Conditions
The Current Conditions screen provides the viscosity
readings for the product when the machine is running, as
well as hopper and freezing cylinder temperatures for the
machine.
Current Conditions is the only Menu screen that will
return the control panel keys to normal operation. The
Menu keys will not be lit when this option is selected but
the panel press keys are fully functional. Exit the Current
Conditions screen and return to the Menu by pressing the
SEL key.
ENABLE WIFI
The ENABLE WIFI screen provides the ability to

enable/disable the WIFI gateway (if the machine has the
optional WIFI equipment).
Press the Up or Down arrow key to move the arrow to the
appropriate selection.
Pressing the SEL key with the arrow by the appropriate
selection will select that setting and return to the
Manager Menu.
Once enabled, the gateway will start broadcasting its
access point. This will broadcast until the machine is
paired with an Internet connection, or after a 10-minute
time-out.
BO BEATER OLVD IN HC
A beater overload occurred during the Heat
cycle.
PF POWER FAILURE IN HC
A power failure caused the heat phase, cool
phase, or Total Cycle Time to exceed the

maximum allowed time. If a power failure
occurs but the Heat Treatment cycle does not
fail, an asterisk (*) will appear on the third line
of the display.
OP OPERATOR INTERRUPT
Indicates the Heat cycle was aborted in the
OPERATOR INTERRUPT option in the Service
Menu.
PS POWER SWITCH OFF
The power switch was placed in the OFF

position during the Heat cycle.
TH THERMISTOR FAILURE
A thermistor probe has failed.
PD PRODUCT DOOR OFF
A product door is not in place or is loose.
Code Failure Message
SOFTWARE VERSION
C709 CONTROL UVC4
VERSION X.XX
> Next
Language
V5.01
English
> Next
Bootloader
V1.13.000
> Next
B.O.M. C700000000
S/N
M0000000
Othr= 00000
> Next
VISC 0.0
HOPPER 41.0
BARREL 41.0