7-2
OPERATOR’S CHECKLIST
Models 358 and 359
Operator’s Checklist
7
Winter Storage
If the place of business is to be closed during the winter
months, it is important to protect the freezer by following
certain precautions, particularly if the building is subject
to freezing conditions.
Disconnect the freezer from the main power source to
prevent possible electrical damage.
On water-cooled freezers, disconnect the water supply.
Use air pressure to blow out any water remaining in the
condensers.
Important!
Failure to follow this procedure may cause
severe damage to the refrigeration system.
Your local Taylor distributor can perform this service for
you.
Wrap detachable parts of the freezer (such as beater,
blades, driveshaft, and freezer door) and place these
parts in a protected, dry place. Rubber trim parts and
gaskets can be protected by wrapping them with
moisture-proof paper. All parts should be thoroughly
cleaned of dried mix or lubrication, which can attract mice
and other vermin.
