Page 35
Tiger CUB Operator Manual
MT-030-60C-C
Vehicle Maintenance
Daily Visual Inspection
The following items shall be inspected once every day before the vehicle is put into service:
•
External frame damage (body).
•
Operation of all lights and warning alarms.
•
Proper operation of all instrument panel gauges and warning lights.
•
Smooth and proper operation of seat belts (if equipped).
•
Engine oil level.
•
Engine coolant level.
•
Fan belts.
•
Air cleaner service indicator (optional).
•
Transmission oil level.
• Hydraulic system fluid level.
• Brake fluid level.
• Inspect for leaking fluids, grease, gasoline, or LPG
fuel.
•
Tire tread or sidewall damage.
•
Proper operation of transmission shift lever and starter interlocks.
•
Proper operation of adjustable seat mechanisms (if equipped).
•
Smooth and proper operation of all controls such as but not limited to:
•
Throttle pedal
•
Brake pedal
•
Parking brake
•
Steering
•
Horn
•
Etc.
•
Proper operation of all locking mechanisms such as but not limited to:
•
Hood latches
•
Cargo box’s
•
Cab doors
•
Etc.
•
Proper operation of all interlocking switches such as but not limited to:
•
Ignition switch
•
Seat or foot interlock switch
•
Brake interlock switch.
•
Etc.
Pre-Operation Inspection
The following items shall be inspected every time before the vehicle is driven:
•
Rear and side view mirror adjustments.
•
Steering operation.
•
Brake operation (service and park brake).
•
Tire pressure (visual inspection only).
•
Proper operation of trailer hitch.
The front axle wheel bearings must
be inspected and adjusted after the
first 15 hours of operation. Failure
to adjust the bearings will result in
premature failure.
NOTICE