Taylor-Dunn SS-025-34, Service And Parts Manual

Page: 8 / 134

Page-8
MS-534-13
Introduction
SS and MX Models, DC System
ABOUT THIS MANUAL
The purchase of this vehicle shows a belief in
high quality products manufactured in the USA.
Taylor-Dunn
®
, a leading manufacturer of electric burden
and personnel carriers since 1949, wants to be sure
this vehicle provides years of reliable service. Please
continue to read this manual and enjoy this high quality
Taylor-Dunn
®
vehicle.
This manual is to serve as a guide for the service,
repair, and operation of Taylor-Dunn
®
vehicles and is
not intended as a training guide. Taylor-Dunn
®
has made
every effort to include as much information as possible
about the operation and maintenance of this vehicle.
Taylor-Dunn is not to be held liable for errors in this
manual or any consequential damage that results from
the use of this manual.
Before servicing, operating, training or performing
maintenance on this or any other Taylor-Dunn
®
vehicle,
read the appropriate Taylor-Dunn
®
manual.
Each Taylor-Dunn
®
manual references the applicable
models and serial numbers on the front cover.
Please, be aware of all cautions, warnings, instructions,
and notes contained in this manual.
WHO SHOULD READ THIS MANUAL
This manual is intended for use by anyone who is going
to operate, own, perform maintenance on, service, or
order parts for this Taylor-Dunn
®
vehicle. Each person
shall be familiar with the parts of this manual that apply
to their use of this vehicle.
HOW TO USE THIS MANUAL
This manual is organized into these main sections:
Introduction
This section describes how to use this service manual
and how to identify your vehicle.
Maintenance, Service, and Repair
This section gives specific information on the servicing
of the vehicle and a schedule for maintenance checks.
This manual is for mechanical repairs only and does
not include electrical diagnosis procedures. Electrical
diagnosis procedures are included in a separate manual.
Replacement Parts
This section provides an illustrated view of various
assemblies. The illustrations are accompanied by tables
identifying the parts.