Taylor-Dunn RE-380-36, Service And Replacement Parts Manual, Page: 48 / 150

Transaxle - GT
Page 48
RE-380-36 & RE-380-48
MR-380-05
NOTE: Values shown are for reference
only
C
D
HARDWARE TORQUE
If hardware is not listed here, refer to standard torque
values in the appendix.
Description Foot Pounds Newton Meters
Pinion nut 154-169 209229
Drain plug 21-25 28.4-33
Gear case to 3rd member 18-20 24.4-27
3rd Member cover bolts 40-50 54-67.5
Axle hub bolt 275 392
Note: Special Washers
The washers for the primary gear case
housing and carrier housing side plate
are in the shape of a cone referred to
as conical or belleville washers.
This type of washer is designed to
maintain tension in bolted assemblies.
Belleville washers must be orientated
correctly to function properly. See illustration.