Taylor-Dunn RE-380-36, Service And Replacement Parts Manual, Page: 22 / 150

Tool List
Page 22
RE-380-36 & RE-380-48
MR-380-05
Tool List
The tools shown here are generic for
servicing Taylor-Dunn vehicles. Not all tools
will be required for servicing this vehicle.
62-027-32: Throttle Module Analyzer
Tests the throttle module in or out of the
vehicle
75-089-00: Throttle Module Test Harness
Used in conjunction with a volt meter to test
the throttle module. The module must be
installed in a working control system.
Note: Part # 62-027-31 includes instructions
62-027-00: Test Light
Used for testing electrical circuits. Switchable
for 12, 24, 36, 48 volt systems.
Required to complete troubleshooting
provided in the vehicle service manuals.
62-027-61 and -62: Sevcon System
Handset
Diagnostics and adjustments (-62 only)
of the Sevcon Power Pak and Micro Pak
control systems.
96-500-48: GT Drive Oil Fill Plug Tool
Used to remove the oil fill plug on GT
drives. It is used with a 3/8” drive extension
(not included).
Controller Programming:
Sevcon: 62-027-63 “PCpaK Cable lead and application.”
96-500-66: SD Drive Primary Case Spreader