6.20
9929758 R01 - 2019 TAYLOR-DUNN G-100 Service Manual
© Copyright TAYLOR-DUNN
PLANETARY DIFFERENTIAL BUSHING
REPLACEMENT
NOTICE
If the differential is completely assembled, perform the
“Planetary Differential Disassembly” procedure.
Ring Gear Bushing Replacement
1.
Press the old bushing out of the ring gear.
2.
Thoroughly clean the bore of the ring gear and check
for any unwanted burs.
3.
Press the new bushing into the ring gear housing.
4.
Install the bushing to the specified depth as shown.
Planet Gear Bushing Replacement
5.
Press the old bushing out of the planet gear.
6.
Thoroughly clean the bore of the planet gear and
check for any unwanted burs.
7.
Press the new bushing into the planet gear until it is
flush on each end. Repeat this procedure for the
remaining planet gears.
Differential Cover Bushing Replacement
8.
Press the old bushing out of the differential cover.
9.
Thoroughly clean the bore of the differential cover
and check for any unwanted burs.
Summary of Contents for G0-010-00
Page 60: ...2 36 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES MAINTENANCE...
Page 196: ...4 48 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES FUEL SYSTEM...
Page 224: ...5 28 9929758 R01 2019 TAYLOR DUNN G 100 Service Manual Copyright TAYLOR DUNN NOTES CVT SYSTEM...
