Taylor-Dunn G-100 2018, Owner'S Manual, Page: 46 / 111

DRIVING PROCEDURES
DRIVING PROCEDURES
1. Read and understand the owner's manual and all warning and instruction
labels before operating this vehicle.
2. Wear the recommended safety gear.
3. Perform the pre-ride inspection.
4. Sit in the driver's seat and fasten the seat belt.
5. Make sure the transmission is in PARK.
6. Start the engine.
7. Apply the brakes and shift into low gear.
8. Check your surroundings and determine your path of travel.
9. Keeping both hands on the steering wheel, slowly release the brakes and
depress the throttle with your right foot to begin driving.
10. Drive slowly at first. On level surfaces, practice starting, stopping, turning,
maneuvering, using the throttle and brakes and driving in reverse. Learn how
the vehicle handles when making both left and right turns at a slow speed.
WARNING
Operating in TURF mode (if equipped) when on sloped, uneven, or loose
terrain could cause loss of control and result in serious injury or death. One
rear wheel may slip and lose traction or may lift up and grab when it touches
the ground again.
11. Increase speed only after mastering all maneuvers at a slow speed.
12. After you become skilled at making turns and begin to operate at faster
speeds, follow these precautions:
• Avoid sharp turns.
• Never turn while applying heavy throttle.
• Never make abrupt steering maneuvers.
• Operate at speeds appropriate for your skills, the conditions and the
terrain.
• DO NOT do power slides, “donuts”, jumps or other driving stunts.
44
OPERATION