Taylor-Dunn C0-T50-80, Service And Parts Manual

Page: 89 / 135

Hardware
Page 89
MC-T50E-02
C0-T50-80
Hex Nuts
S.A.E. Grade 5 S.A.E. Grade 8
Hex Lock Nuts (stover)
Nuts with no markings are to be treated as S.A.E. Grade 2
Lock nuts use a letter to indicate the grade of the nut. Grade A’ locknuts would be the equivelent of Grade
‘2’ hex nuts, Grade ‘B’ as Grade ‘5’ and Grade ‘C’ as Grade ‘8’.
NOTE: Nuts with no markings are to be treated as S.A.E. Grade A
S.A.E. Grade B S.A.E. Grade C
Other Nuts
Other nuts used by Taylor-Dunn
®
should be treated as S.A.E. grade A
Grade L’9
Metric Nuts
5.8 8.8 10.9 12.9