Batteries
Page 64
Bigfoot G-1500
MB-440-10
ADJUSTMENT
1: Loosen the ball joint jam nut and the cable
mounting nuts on the spring steel mounting plate.
2: Disconnect the coupler from the ball joint at the
transmission.
3: Place the shift lever in forward.
4: Move the transmission shift lever to the forward
detent.
5: Using the cable nuts and/or the ball joint coupler,
adjust the linkage so that the coupler easily slides
onto the ball joint.
6: Tighten all mounting and jam nuts.
7: While slowly rotating the transmission input
sheave, shift the transmission from forward to
reverse and back to forward to confirm proper
adjustment.
8: Reconnect the battery and test drive.
This section is one section of a complete service
manual. Before starting any procedure, read all
warnings and instructions that are located in the
Service Guidelines chapter.
WARNING
Do not modify the stainless steel shift cable mounting
plate at the transmission. This mounting plate is
spring steel and functions as an active part of the
shifting mechanism. Modification of this mounting
plate may cause improper operation of the shift
linkage resulting in damage to the transmission.
NOTICE
Summary of Contents for Bigfoot G-1500
