INSTALLATION MANUAL TX80 SKYGLASS
INTERFACOM, S.A.U.
Inst TX80_Skyglass_003_en.doc
4
TX80 must be installed so that passengers can’t see or access it. Seals and serial
numbers must be easily visible and accessible upon verification at a verification office. For
this reason it is necessary to take care of the orientation, with the stickers looking to the
outside.
Standard positions are inside the glovebox or under the vehicle board.
Some vehicle
brands have standardised the TX80 position.
It is necessary that the identification sticker and the seals are easy to inspect. Cables
can’t cover neither the identification sticker nor the seals.
3.2. MOUNTING AND LOCATION OF SKYGLASS
SKYGLASS must be tied to the interior rear view mirror of the vehicle by two Velcro strips.
The connection of the device is done through their cable into the TX80 internal connector.
