TAVRIDA ELECTRIC VCB Series, User Manual, Page: 12 / 142

1.3 Disclaimers
Tavrida Electric will not accept any claims for damages caused by improper transport, storage as well as
unpacking. Transport damage must be reported in writing to the supplier as soon as it is discovered.
The present User Guide contains information necessary for the installation, commissioning and operation. It is
absolutely necessary for the proper use of the Vacuum Circuit Breakers to read the User Guide carefully before
starting and to adhere to the instructions and the relevant regulations. Tavrida Electric will not accept any
claims for damages caused by improper usage of the Vacuum Circuit Breakers. In case of special
configurations please contact Tavrida Electric prior of usage of the Vacuum Circuit Breakers.
1.4 Precautions

Check whether the installation position (distances, spatial separation, and the surroundings) is suitable
for the switching devices.

Installation, operation and maintenance shall only be carried out by trained and experienced personnel
who are familiar with the equipment and the electrical safety requirements.

During installation, commissioning, operation and maintenance of the equipment the relevant legal
regulations (such as DIN/VDE/IEC), accident prevention regulations and the connecting conditions of the
electric utilities shall be followed.

Take note that during operation of the Vacuum Circuit Breakers certain parts are subject to dangerous
voltage. Mechanical parts, also remote-controlled, can move quickly. Failure to comply may result in
death, severe personal injury or damage to equipment.

Pay attention to the hazard statements located throughout this User Guide.

The operating conditions of the vacuum circuit breakers shall comply with the technical data specified in
this User Guide.

Personnel installing, operating and maintaining the equipment shall be familiar with this User Guide and
its contents.
1.5 Warranty
Unless otherwise stated in the contract, the warranty period is stated in Standard warranty policy. If agreed to
otherwise, the contract conditions apply. No warranty is given in the case of …
a)
… the warranty period having run out during the period of storage with the customer;
b)
… the operating conditions, ambient conditions, transport and storage conditions have not been adhered
to according to the application description or the Installation and Operating Instructions;
c)
… an unauthorized manipulation of the device has been carried out, such as opening the housing or
damaging the seal;
d)
… the device has not been properly installed, such as incorrect connection of supply voltage of auxiliary
circuits.